AC/DC Photoelectric Sensor Autonics BEN10M-TFR - Korea
Overview of BEN10M-TFR
BEN series photoelectric sensors integrate amplifiers, universal DC and AC/DC power supply, sensitivity adjusters, and Light ON / Dark ON modes, helping users easily set up device configuration (except through-beam type).
The BEN series is equipped with a dedicated photodiode IC, delivering high performance suitable for various applications.
Key Features
Universal AC/DC voltage model (relay contact output)
Light ON/Dark ON mode switch
Sensitivity adjuster (except the through-beam type)
Stability indicator (green LED) and operation indicator (red LED)
High performance specialized sensor IC
Output type: relay contact (AC/DC type), NPN/PNP open collector (DC type)
Specifications of Autonics BEN10M-TFR
Weight includes packaging. The weight in parentheses is the weight of the device only.
Temperature or humidity mentioned in the Environment section are measured under non-freezing or non-condensing conditions.
|
Detection type |
Through-beam type |
|
Detection distance |
10m |
|
Detection target |
Opaque material, min. Ø16mm |
|
Light source |
Infrared LED (850nm) |
|
Response time |
Max. 20ms |
|
Power supply |
24-240VAC~ ±10% 50/60Hz, 24-240VDC ±10%(ripple P-P: max. 10%) |
|
Current consumption |
Emitter/Receiver: Max. 4VA |
|
Operating mode |
Light ON/Dark ON(setting by switch) |
|
Control output |
Relay |
|
Connection type |
Cable type(Ø5, 2m) |
|
Environment_Ambient light |
Sun light: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received light) |
|
Environment_Ambient temperature |
-20 ~ 65℃, storage: -25 ~ 70℃ |
|
Protection Structure |
IP50 |
|
Environment_Ambient humidity |
35 ~ 85%RH, storage: 35 ~ 85%RH |
|
Material |
Case, case cover: Heat resistant Acrylonitrile butadiene styrene, Detection part: Polycarbonate(with polarizing filter: polymethyl methacrylate), Bracket: Steel Plate cold commercial, Bolt: steel chromium molybdenum, Nut: steel chromium molybdenum |
|
Accessories |
Adjustable driver, fixing bracket, bolts, nuts |
|
Weight |
≈ 354g |
Code Selection Table of BEN10M-TFR
Dimensions of BEN Series
Wiring Diagram of BEN10M-TFR
Applications of Photoelectric Sensor Autonics BEN10M-TFR
The Autonics BEN10M-TFR photoelectric sensor, a universal AC/DC voltage type, can be used for various applications in industries and automation, including:
Conveyors and sorting, Alarms and safety, Measurement and inspection, Printing and packaging, Automotive industry, Electronics industry, Textile industry, Food industry